BMS 12S 35 A Li-ion Li-Po

BM1377 BMS Li ion Li-po 12S 35A

Circuito di controllo "base" per controllare una batteria al litio composta da piu' elementi. Il BMS gestisce la batteria disconnettendola al carico applicato al raggiungimento della soglia minima e bilancia gli elementi.

Il BMS viene connesso tra la batteria e il carico applicato, usando il connettore in dotazione si possono monitorare le singole celle disconnettendo il carico qualora anche un elemento supera la soglia minima di scarica.

Verificare sempre se il carico applicato eccede le specifiche riportate nella scheda tecnica ed assicurarsi della corretta dissipazione di calore del circuito

Tipo di batteria: LiFePO4

N° elementi : 12

Tensione nomnale batteria: 36V

Potenza max continua: 60A

Tensione di cut off per singola cella: 2,9V

Dimensioni: mm L115mm*W65mm*T12mm

Peso:

Protective and balancing circuit for LiFePO4 cells - designed for 4 cells in the serie, the total nominal voltage 12,8 V, balancing voltage 3.6 V.

Battery ManagementSISTEM ( BOARD)

The easiest way to protect a lithium battery pack. The BMS board manages a pack of cells and disconnects the load under any unfavorable circumstances: cell over voltage, cell under voltage.

The BMS is connected between the battery pack and the load and the charger. There are additional wires from single cells to the BMS to monitor each cell. (Marking of the contacts: B+/B- to connect to the battery; B1, B2, B3..... to connect to each cell; CH+/CH- to connect charger (optional); P+/P- the whole PACK (battery with BMS) output to the load.)

Voltage of the packs:

BMS for 4 cells 12V

Please observe the maximal current of the pack including the peak currents when starting or connecting the equipment.

Note: the balancing currents of the BMS boards are very low (only few milliamps), this means it is not possible to balance large capacity cells. We suggest using additional balance modules to increase the balancing current of the cells.

Specification:

Continuous Power: 80A

Peack Power: 160A

Operational temperature

-40 to 85 °C

Dimension

120 x 80 x 30 mm

Weight

185g