BMS Li FePO4 4S 80-160A

BM985

BMS LiFePO4 4S 80-160A

BMS capace di controllare in carica e scarica n°4 ELEMENTI

Li FePO4

Carico continuo massimo applicabile / Max continuous power 80A

Carico massimo temporaneo /Max peak power 160A

Protective and balancing circuit for LiFePO4 cells - designed for 4 cells in the serie, the total nominal voltage 12,8 V, balancing voltage 3.6 V.

Battery ManagementSISTEM ( BOARD)

The easiest way to protect a lithium battery pack. The BMS board manages a pack of cells and disconnects the load under any unfavorable circumstances: cell over voltage, cell under voltage.

The BMS is connected between the battery pack and the load and the charger. There are additional wires from single cells to the BMS to monitor each cell. (Marking of the contacts: B+/B- to connect to the battery; B1, B2, B3..... to connect to each cell; CH+/CH- to connect charger (optional); P+/P- the whole PACK (battery with BMS) output to the load.)

Voltage of the packs:

BMS for 4 cells 12V

Please observe the maximal current of the pack including the peak currents when starting or connecting the equipment.

Note: the balancing currents of the BMS boards are very low (only few milliamps), this means it is not possible to balance large capacity cells. We suggest using additional balance modules to increase the balancing current of the cells.

Specification:

Continuous Power: 80A

Peack Power: 160A

Operational temperature

-40 to 85 °C

Dimension

120 x 80 x 30 mm

Weight

185g